What you need for the cost calculation
Requirements for the calculation
- →Net area in m² known (excluding walls and built-in furniture)
- →Room perimeter estimated for edge insulation strips
- →Pipe spacing planned: 15 cm = approx. 6.7 m of pipe per m², 10 cm = approx. 10 m/m²
- →Decision: free-flowing screed (CA) or cement screed (CT)
- →DIY (materials only) or incl. installation by a specialist contractor
Studded panel system costs: what costs what?
- →N-PS studded panel: area × 1.05 (offcuts) ÷ 15.68 m², round up to whole boxes × €119.71
- →Heating pipe: area × 6.7 m (15 cm spacing) × 1.1 (bends, connections) × €0.45/m (600 m coil) or €0.50/m (200 m coil)
- →Edge insulation strips: room perimeter in m ÷ 50, round up × €22.51
Studded panel system material costs 2026
| Item | Price |
|---|---|
| N-PS 1 mm studded panel (€119.71 / 15.68 m²) | 7,63 €/m² |
| PE-RT heating pipe 16×2 mm, 15 cm spacing (approx. 7.3 m/m² × €0.45/m) | approx. €3.30/m² |
| Edge insulation strips (€0.45/m, depending on room size) | approx. €0.30–0.60/m² |
| Total materials (panel, pipe, edge strip) | approx. €11.60–12/m² |
| EPS insulation under the panel (guide value, depending on thickness) | approx. €3–8/m² |
| Calcium sulphate free-flowing screed incl. laying (guide value, contractor) | approx. €20–30/m² |
| Cement screed incl. laying (guide value, contractor) | approx. €18–28/m² |
| Studded panel system complete kit 100 m² (panels, PE-RT pipe, edge insulation strips) | 1.260,12 € = 12,60 €/m² |
| 20 m² – materials (2 boxes, 200 m coil of pipe, 1 × edge insulation strip) | approx. €362 |
| 20 m² – per m² | approx. €18.10/m² |
| 50 m² – complete kit (PE-RT) | 701,17 € |
| 50 m² – per m² | approx. €14.02/m² |
| 100 m² – complete kit (PE-RT) | 1.260,12 € |
| 100 m² – per m² | approx. €12.60/m² |
FAQs on studded panel system costs
Materials consisting of the N-PS studded panel (€7.63/m²), PE-RT heating pipe at 15 cm spacing (approx. €3.30/m²) and edge insulation strips cost approx. €11.60–12/m² in total. As a complete kit, it is €11.50/m² (200 m²) to €14.02/m² (50 m²) depending on area, €12.60/m² for 100 m². Insulation (approx. €3–8/m²) and screed by a contractor (approx. €18–30/m²) come on top.
The complete kit for 100 m² with studded panels, PE-RT heating pipe 16×2 mm and edge insulation strips costs €1,260.12. On top come insulation, manifold and controls, and the screed. For screed laid by a contractor, around €18–30/m² is usual depending on region, i.e. roughly €1,800–3,000 for 100 m².
Cement screed is usually slightly cheaper per m², but calcium sulphate free-flowing screed can be laid thinner (from approx. 35 instead of 45 mm cover), fully surrounds the pipe between the studs and is ready for functional heating sooner (after 7 instead of 21 days). Get quotes for both options.
At 15 cm spacing approx. 6.7 m of pipe per m², at 10 cm approx. 10 m/m², at 20 cm approx. 5 m/m². Add 10 % for bends and connecting pipes. Example 50 m² at 15 cm: 50 × 6.7 × 1.1 ≈ 370 m of pipe.
In terms of materials, the two are close: the studded panel replaces grid film and tacker staples but needs separate insulation, whereas the tacker panel combines insulation and pipe carrier. The advantage of the studded panel system lies in fast installation without a tacker and the free choice of insulation.
Studded panel system components — current prices

Studded panel for underfloor heating 15.68 m² without insulation

Studded panel underfloor heating kit 200 m²

Studded panel underfloor heating kit 180 m²
