Dry systemImpact sound insulation
MC Therm

Impact Sound Insulation for Dry Underfloor Heating 5 mm – PE Foam, 27 dB, 35 m² Roll

Self-adhesive impact sound insulation made of cross-linked, closed-cell PE foam for dry underfloor heating. 5 mm thick, impact sound improvement ΔLw 27 dB, b...

€199,37€5,70 /m²
Incl. 19% VAT · Freight shipping free from €2.000 · INSTALLMENT PAYMENT POSSIBLE
m²
Gib deine Fläche ein – die Plattenanzahl wird automatisch gesetzt.

Tipp: Plane zusätzlich ca. 5–10 % Verschnitt ein (Zuschnitt an Wänden, Ecken und Türen). Die Aufteilung in Mäander- und Kreis-/Umlenkelemente berechnet der Trockenbau-Konfigurator.

Drywall Underfloor Heating Complete Set | Drywall System Configurator
Bis zu 10 % sparen, wenn du ein Komplettset kaufst Put it together in the configurator
→

Auf Lager
Only 12 sets available
Delivery by
✓Impact sound improvement ΔLw 27 dB (ISO 140-8)
✓Only 5 mm build-up height – ideal for older buildings & renovation
✓Cross-linked PE foam, water absorption < 1 %
✓Self-adhesive with release liner – 35 m² roll
Freight shipping free shipping from €2.000
Statutory warranty under German law (BGB)
30-Day Returns risk-free
Technical Consulting Mon–Fri · 8 AM–5 PM
ZahlungAmerican Express Apple Pay Bancontact BLIK EPS Google Pay iDEAL Wero Klarna Maestro Mastercard MB WAY PayPal Satispay Shop Pay Union Pay Visa

Self-adhesive impact sound insulation made of cross-linked, closed-cell PE foam for dry underfloor heating. 5 mm thick, impact sound improvement ΔLw 27 dB, back with peel-off release liner, roll 1.4 × 25 m = 35 m². Lies directly beneath gypsum fibre, chipboard and EPS heating panels. Note: not vapour-permeable (μ 1300).

Technische Daten

Material
Cross-linked PE foam, closed-cell
Thickness
5 mm
Roll size
1.4 × 25 m (35 m² per roll)
Impact sound improvement ΔLw
27 dB (ISO 140-8)
Dynamic stiffness s'
92 MN/m³ (EN 29052-1)
Density
30 kg/m³ (ISO 845)
Compressive stress
24 kPa at 10 % / 45 kPa at 25 % deflection (ISO 3386-1)
Thermal conductivity λ
0.036 W/(m·K) at 10 °C (EN 12667)
Thermal resistance
≈ 0.14 m²K/W
Water absorption
< 1 vol.-% after 24 h (ISO 2896)
Vapour diffusion μ
1300 (sd ≈ 6.5 m) – not vapour-permeable
Application
Under dry-system heating panels (gypsum fibre, chipboard, EPS)
Back
Self-adhesive with peel-off release liner
Colour
anthracite / green (colour may vary)

Lieferumfang

1x roll of impact sound insulation 5 mm, self-adhesive, 1.4 x 25 m = 35 m²

Noch keine Bewertungen vorhanden.

Shipping

Freight shipping on pallet – rates decrease with order value

up to €999: 150 € · from €1.000: 120 € · from €1.500: 99 € · free shipping from €2.000

Kerbside delivery

Delivery time 3–5 working days · tracking by email

Warranty & guarantee

Statutory warranty

Matched to the MC Therm dry systems

30-day right of return without giving reasons

What do I need the impact sound insulation for?

It goes under the dry-system heating panels and reduces the transmission of footfall noise into the floor structure – especially important on upper floors and in apartment buildings. It also evens out minor unevenness and decouples the heating panels from the subfloor.

Is the impact sound insulation vapour-permeable?

No. With μ = 1300 (sd ≈ 6.5 m) it acts as a vapour retarder. On concrete slabs this is not a problem. On timber joist floors, half-timbered buildings or floors above unheated rooms, please have the moisture behaviour assessed by a designer beforehand. For vapour-permeable build-ups we recommend the wood fibre dry system.

How many rolls do I need?

One roll covers 35 m². Divide the floor area by 35 and round up; allow about 5 % extra for cutting. Example: 60 m² floor area = 2 rolls.

Which systems can I combine it with?

With the MC Therm dry systems made of gypsum fibre, chipboard and EPS. The wood fibre system dampens impact sound itself and usually needs no additional underlay. Please do not use the underlay under wet screed, levelling compound or thin-layer systems.

How is the impact sound insulation installed?

Clean the subfloor and level out unevenness. The back is self-adhesive: peel off the release liner, stick the strips to the subfloor butt-jointed rather than overlapped, and tape the joints. Fit edge insulation strips along all walls, then lay the heating panels directly on top. Cut with a utility knife.

Schichtaufbau

5–15 mm
Bodenbelagz. B. Vinyl, Parkett, Fliesen (je nach Belag ggf. mit 10 mm Gipsfaser-Deckplatte)
22 mm
Gipsfaser-HeizelementMäander- und Kreiselement mit Heizrohr 16 mm (alternativ Spanplatte oder EPS)
5 mm
Trittschalldämmungvernetzter PE-Schaum, ΔLw 27 dB
—
TragkonstruktionBetondecke, Estrich oder Holzbalkendecke über beheiztem Raum
Gesamtaufbauhöhe ab 27 mm (ohne Bodenbelag, mit Gipsfaser-Heizelement)

Systemgewicht (Rohrabstand 150 mm)

Komponentekg/m²

Your benefits at a glance

1

Impact sound improvement ΔLw 27 dB at only 5 mm thickness

2

Matched to MC Therm dry systems with gypsum fibre, chipboard and EPS

3

Quick to lay: peel off the release liner, stick down, tape the joints

4

λ 0.036 W/(m·K), density 30 kg/m³, compressive stress 24 kPa at 10 % deflection

Areas of application

Dry systemimpact soundsound insulationolder buildingsrenovationlow build-up height

Free & non-binding

Personal consultation

Our team offers free advice – by phone, email, or directly in the chat. We help you with system selection, quantity calculation, and planning.

25+ Years of experience
5,000+ Projects
4.9★ Average rating
2 J. Statutory warranty